How is the protective film applied?

Determining the Direction for Screen Protector Application: Screen protectors typically consist of three layers. Therefore, when applying, place all three layers together on the screen surface to determine the correct orientation.

Cleaning the Surface: The cleanliness of the surface to be protected greatly affects the proper use of the screen protector. If surface dirt is not thoroughly removed, the protector will not make full contact with the screen and is prone to peeling off. Therefore, the second step is to use a microfiber cloth to wipe away fingerprints, dust, oil stains, and dirt from the screen.

Removing the Screen Protector: When removing the screen protector, first hold the adhesive strip, then peel off about 1/3 of the protective film, not all of it. With the exposed middle film facing the screen, carefully align it with the edges and gently place it on the screen. Then, slowly peel off the entire screen protector, aligning all exposed middle films with the edges and placing them on the screen.

Removing Air Bubbles: After completing the above steps, you will find many small air bubbles in the protective film. At this time, you must use a flat scraper to remove the air bubbles to prevent residue from reducing the effectiveness and lifespan of the protective film.