Indoor Aluminum Floor Silicone Sealant
Cut tip off cartridge and screw nozzle onto cartridge. Cut the tip of nozzle at an angle to achieve the desired bead size. Apply silicone with a caulking gun in a continuous bead to the prepared joint. Use masking tape to get a clean, even sealant line and to eliminate cleaning difficulties on porous surfaces. Be sure to remove the tape before sealant begins to skin.
Products Description
directions for use
Thoroughly clean all substrates to be sealed, removing all contaminants such as grease, oil, dust, frost or water.
Cut tip off cartridge and screw nozzle onto cartridge. Cut the tip of nozzle at an angle to achieve the desired bead size. Apply silicone with a caulking gun in a continuous bead to the prepared joint. Use masking tape to get a clean, even sealant line and to eliminate cleaning difficulties on porous surfaces. Be sure to remove the tape before sealant begins to skin.
Smooth down after application (within 3-5 minutes) before skin formation occurs, by using a flat or rounded tool. One can also use a finger, dipped in soapy water.
Uncured silicone can easily be removed from hands or tools using a clean cloth soaked in solvent such as turpentine or paraffin. If removing uncured silicone from clothing, check fabric colour fastness before using the above mentioned solvents.
Sealant will be touch dry within 1hr and reach full cure after approximately 60hrs.
When fully cured, sealant can be removed by mechanical means, i.e. using a sharp knife or chemically, using a Silicone Stripper
A pungent vinegar-like odour will be noted during application but will disappear as the sealant cures
If the area being sealed, needs to be painted, ensure the paint has dried COMPLETELY before sealing
main application
| Appearance | Black, Grey, homogeneous paste |
| Sagging properties(mm) | GB/T 13477.60 |
| Tack free time(min) | GB/T 13477.5 35, approx. |
| Curing speed(mm/d) | HG/T 4363 3.2, approx. |
| Non-volatile contents ( %) | GB/T 2793 97, approx. |
| Shore A-hardness | GB/T 531.1 55, approx. |
| Tensile strength(MPa) | GB/T 528 2.5, approx. |
| Elongation at break(%) | GB/T 528 600, approx. |
| Operating temperature(C) | -40~90 |
| Note | The result is affected by the actual environment and has some deviation. |
Application Scenarios
Packaing
Loading
Do you have similar silicone sealant purchasing experience?
1.The quality of the merchant's samples is excellent, but there may be various quality issues with the product when placing an order such as a lot of particles, bubble , bad adhesive, silicone already dry buy inside, and some 5-7 days still wet.
2.The actual capacity you received differs significantly from the ordered capacity, which is the reason why some unscrupulous merchants have extremely low prices.
3.False reporting of shelf life, these merchants are not responsible for quality and only do one-time business
We can assure every customer that there will be no shortage of weight or poor quality, and we will provide better service to our customers.
Hot Tags: indoor aluminum floor silicone sealant, China indoor aluminum floor silicone sealant manufacturers, suppliers, factory, silicone sealant for indoor aluminum wood veneer, silicone sealant for indoor aluminum cabinet, silicone sealant for indoor aluminum bathroom, Indoor Aluminum Wood Veneer Silicone Sealant, Indoor Aluminum Floor Silicone Sealant, indoor silicone sealant
Send Inquiry
